ApplicationSurface levelling

Tip!
  • In dry areas the seams should be reinforced with joint reinforcement tape and M 20.
  • On even substrates building boards can be laid by bonding throughout.
  • For bonding with dowels, in case of uneven substates, the boards of minimum thickness of 20mm must be used.
  • M200 can be used to glue the panels on the wall. This fast drying material can also be used to fill holes or slots in the wall.

ApplicationCreating a shower partition

Tip!
  • Building boards of a minimum thickness of 20mm should be used. The building boards are screwed to the stud frame.
  • For the composite waterproofing in wetrooms use the flexible, single component sealant slurry Botament® MD 1 Speed together with a Sealing tape. Thicknesses that fall below 20 mm must be fastened additionally (dowels, bolts).

ApplicationConcealed system for WC tank

Tip!
  • You can create claddings for virtually all wallmounted WC’s types and sizes.
  • Apply reinforcement tape at joints and edges using Botament® M 20 Classic .

ApplicationPipe cladding

Tip!
  • Determine the length you need the cladding to be and cut to size.
  • Apply Botament® M 20 Classic in pyramid-form to both sides of the pipe cladding. Press the cladding against the walls to fix it to the walls.
  • Use a spirit level to make sure both sides are level. Remove any excess adhesive.
  • The pipe cladding can be tiled straight away. There is no need for prior priming.

ApplicationFloor level tiling (mineral substrates)

Tip!
  • If necessary, treat the surface with Deep Action Primer Botament® D11.
  • Use boards of a minimum thickness of 10 mm which should be laid staggered.
  • iSOX building boards form a secure, waterproof barrier and provide an excellent bonding surface for tiling. Superior thermal insulating properties make iSOX building boards particularly suited in combination with underfloor heating.
  • For the composite waterproofing in wetrooms use the flexible, single component sealant slurry Botament® MD 1 Speed together with a Sealing tape.

ApplicationBuilding shelves and recesses

Tip!
  • You can use two L elements or one U element when making shelves.
  • Additional supporting structure might be needed for shelves for heavier loads.
  • Waterproofing with the flexible single component sealant slurry 1K Botament® MD 1 Speed and a sealant tape.
  • Apply reinforcement tape at joints and edges using Botament® M 20 Classic.

ApplicationRaised platforms and round shapes

Tip!
  • A minimum thickness of 30mm should be used for the platform structure, with the maximum distance between construction struts at 30cm.
  • Joints on the platform must always be underpinned with the construction struts.
  • In dry areas the seams should be reinforced with joint reinforcement tape and Botament® M 20Classic.

ApplicationCladding baths

Tip!
  • No additional re-enforcing is needed for the cladding.
  • Use Flex-Board to create round-shaped claddings.
  • Apply iSOX Polymer to seal along the top edges of the boards.

The total wet room solutions package from a single source

iSOX wet room solutions have the capabilities to offer a total wet room solutions package provicting high quality, value added, innovative building systems that are fast safe, easy to install and totally waterproof.

Stay up-to-date!

Follow us and receive our latest product updates.